-
Hold to talk delay when using headset microphone
I'm currently having an issue I cannot figure out the fix for. My setup is using a Quest 2 VR headset with headphones plugged into it. In order to get the app to recognize any voice input, I need to enable nspeech for voice recognition. When I do that, I get the input menu and can pick headset microphone. The problem is that when I push the assigned button to speak, there is a 2 second delay before I hear the audible beep and it recognizes my voice. If I switch the input to something other than headset microphone, the delay seems to go away.
Any suggestions on how to solve this problem?
-
I am having a similar PTT delay. I used to have another headset and it was fine, but with the Oculus its a 3-5 second delay before the radio "beep" for starting recognition. If I press and hold until the beep and then speak its fine, if I use always on, its not as "quick" but it works. If I do hold is the problem.
VOICE_OPTION: HOLD
Non-default Properties:
minimum_voice_recognition_confidence: 0.25
minimum_voice_recognition_confidence_system_sre: 0.3
naudio_output_interface_listprop: 'WASAPI'
use_naudio_for_speech_recognition: True
13:36:36.269 : Listening for voice command...
13:36:36.269 : Opened channel - waiting for speech
13:36:36.269 : Getting audio from nAudio input stream
13:36:40.136 : Invoking speech recognition...
13:36:40.136 : Cancelling wait for speech
13:36:40.159 : System recogniser recognised : "can you hear me", Confidence = 0.939
13:36:40.165 : PlaybackModerator: Opening radio channel as Chief
13:36:40.534 : Playing sounds, events: acknowledge/radio_check
13:36:40.534 : (acknowledge/radio_check)
13:36:41.768 : PlaybackModerator: Closing radio channel as Chief
Last edited by tvachon; 06-03-2024 at 17:39.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules