Results 1 to 5 of 5

Thread: Voice issues

  1. #1
    Junior Member
    Join Date
    May 2019
    Posts
    3

    Voice issues

    So am new here after hearing good things about the app.
    However i seem unable to get the voice recognition to work.
    I tried it, followed by using the sticky post to re-install language packs etc.
    Followed the info and have googled ( spent last 2hours trying this ) but to no avail.
    It shows all is working, language pack loaded en-gb etc but it does not pick up anything i say.

    I have checked levels, checked its default etc but all i get in return is the variations of " cant hear " ...

    Help before i go nuts!!????
    15:57:26.819 : Set iRacing mode from previous launch
    15:57:26.821 : Starting app. Version: 4.9.8.0
    15:57:26.884 : Using sound pack version 165, driver names version 135 and personalisations version 137
    15:57:26.890 : Preparing sound effects
    15:57:26.891 : Prepare sound effects completed
    15:57:26.892 : Preparing driver names
    15:57:26.909 : Prepare driver names completed
    15:57:26.909 : No name has been selected for personalised messages
    15:57:26.910 : Preparing voice messages
    15:57:26.913 : Spotter Jim (default) has oval-specific sounds - these will be used for tracks marked as 'oval'
    15:57:27.153 : Prepare voice message completed
    15:57:27.154 : Finished preparing sounds cache, found 6848 driver names and 2827 sound sets. Loaded 376 message sounds with 369 active SoundPlayer objects
    15:57:27.190 : Reading driver name mappings
    15:57:27.192 : Read 2164 driver name mappings
    15:57:27.192 : Reading driver name mappings
    15:57:27.192 : Read 422 driver name mappings
    15:57:27.389 : Loading controller settings
    15:57:27.389 : Load controller settings complete
    15:57:27.426 : Attempting to get recogniser for en
    15:57:27.440 : English (United Kingdom) - (en-GB)
    15:57:27.456 : Speech engine initialized successfully.
    15:57:27.467 : Loading all voice command alternatives from speech_recognition_config.txt
    15:57:27.550 : Attempted to initialise speech engine - success = True
    15:57:27.708 : Device Connected - Name: "Driving: Thrustmaster TX Racing Wheel" GUID: "2b8e3920-6f3d-11e9-8001-444553540000"
    15:57:27.711 : Device Connected - Name: "Keyboard" GUID: "6f1d2b61-d5a0-11cf-bfc7-444553540000"
    15:57:27.719 : Device Connected - Name: "Supplemental: Arduino Micro" GUID: "9035ed20-6f54-11e9-8001-444553540000"
    15:57:27.736 : Checking for updates
    15:57:27.768 : Took 0.61s to lazy load remaining message sounds, there are now 7957 loaded message sounds with 369 active SoundPlayer objects
    15:57:28.217 : Got update data from primary URL: /thecrewchief.org/
    15:57:28.229 : Check for updates completed
    From the screen :
    Last edited by Crash2k; 23-05-2019 at 14:59.

  2. #2
    Junior Member
    Join Date
    May 2019
    Posts
    3
    Anyone? Any suggestions on what could be the issue or what to try next?

  3. #3
    Junior Member
    Join Date
    May 2019
    Posts
    6
    Quote Originally Posted by Crash2k View Post
    Anyone? Any suggestions on what could be the issue or what to try next?
    Have you bound a PTT? I'd double check it with a PTT just to make sure it's activating. Then my default is 'Can you hear me?'. You need to wait half a second/second after the beep to get it to work properly. Also speak clearly. I'd check your mic levels. I find it needs quite a good level to work correctly.

  4. #4
    Junior Member
    Join Date
    May 2019
    Posts
    3
    Quote Originally Posted by zirouk View Post
    Have you bound a PTT? I'd double check it with a PTT just to make sure it's activating. Then my default is 'Can you hear me?'. You need to wait half a second/second after the beep to get it to work properly. Also speak clearly. I'd check your mic levels. I find it needs quite a good level to work correctly.
    Hi.
    I have set up a ptt , which i did straight away and do get the beep. I have tried waiting a second or two but with no luck.
    The mic is set full and a 20db boost as i saw somewhere not recommending the 30db .
    I will recheck

  5. #5
    Junior Member
    Join Date
    Apr 2019
    Posts
    4
    If you're still have problems then check my posts HERE which sorted things out for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •