PDA

View Full Version : CC won't respond to voice commands



TonyR64
02-10-2018, 08:47 PM
It looks like I have everything setup ok, but there is no response when I ask a question about fuel, tires, etc.

I get the following message at start up: : Attempted to initialise speech engine - success = False

I have the following installed; SpeechSDK51, SpeechSDK51LangPack, and SpeechPlatformRuntime.

TonyR64
02-10-2018, 08:48 PM
I reinstalled the language pack and the error message went away. Set en, but still no response.

TonyR64
02-10-2018, 10:08 PM
18:06:17.934 : Attempted to initialise speech engine - success = False
18:06:32.594 : Attempting to initialise speech recognition for user specified location en
18:06:32.604 : Unable to initialise speech engine with voice recognition pack for location en. Check that SpeechPlatformRuntime.msi and MSSpeech_SR_en_TELE.msi are installed.
18:06:32.607 : Exception message: No recognizer of the required ID found.

TonyR64
02-11-2018, 12:43 AM
I've got the right software installed now, but there's another problem; The button on my wheel that I want to use to talk to the CC is recognized as button 20 on my Logitech Profiler, but in CC when I go to assign it CC thinks its button 19?????

When I press the button and speak, CC says it can't understand me. It will say "I didn't get that" or "Please repeat". PLEASE HELP!!!!! LOL

TonyR64
02-11-2018, 12:47 AM
Now I get the following message;

"Use the method SetInputToDefaultAudioDevice if a microphone is connected to the system, otherwise use SetInputToWaveFile, SetInputToWaveStream or SetInputToAudioStream to perform speech recognition from pre-recorded audio."

mr_belowski
02-11-2018, 06:47 AM
You get that error message when there's no default sound recording device set in the windows sounds control panel

TonyR64
02-11-2018, 04:27 PM
You get that error message when there's no default sound recording device set in the windows sounds control panel

Ok, I checked that and rebooted the pc...all's good now, thanks!

mr_belowski
02-11-2018, 04:46 PM
Good stuff, thanks for getting back to me

Davet323
02-18-2018, 12:29 AM
I have been trying to get voice recognition working for days now. With totally NO joy I'm very close to giving up.. Not happy

Davet323
02-18-2018, 01:57 AM
I have been trying to get voice recognition working for days now. With totally NO joy I'm very close to giving up.. Not happy

13:56:11.480 : Attempting to initialise speech recognition for user specified location en-GB
13:56:11.482 : Unable to initialise speech engine with voice recognition pack for location en-GB. Check that SpeechPlatformRuntime.msi and MSSpeech_SR_en-GB_TELE.msi are installed.
13:56:11.484 : Exception message: Retrieving the COM class factory for component with CLSID {49428A60-C997-4D0E-9808-9E326C178D58} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
13:56:11.485 : Attempted to initialise speech engine - success = False

mr_belowski
02-18-2018, 07:11 AM
That error suggests that the recognition runtime isn't installed

Davet323
02-18-2018, 10:01 AM
That error suggests that the recognition runtime isn't installed

Mate , I have done it 10 plus times .. installed uninstall many time it don't work

mr_belowski
02-18-2018, 11:51 AM
try going through the step here, one by one

http://thecrewchief.org/showthread.php?547-Speech-recognition-trouble-shooting&p=3354#post3354

There's something wrong with your speech recognition installation. Not sure what - bear in mind that this is a Microsoft component, I didn't write it, and the app will work well enough without it